|
3DQuickMold® is a
professional plastic mold design solution. It is developed by an engineering
team with 15 years in CAD programming and 17 years in plastic mold design
industry. To solve very complicated plastic mold design problem is the prime
objective of developing 3DQuickMold®. 3DQuickMold®
follows the industrial practices and use the same workflow in mold shops.
The ease of use and powerful mold design capabilities have been verified by
the early users of 3DQuickMold®.With the introduction of
3DQuickMold® in the market for less than two years, 3DQuickMold®
is leading in market acceptance and growth rate in the local market.
Key Functions
Mold
Splitting
Flexible
Workflow
High
Performance
Key
Functions
3DQuickMold® makes itself
stand out from the competition in the mold splitting functions and the ways
it guide mold engineers to complete the design task. Same as SolidWorks®
in CAD, it is the best tool for experience mold designers or young engineers
who start the plastic mold design career. With its fast and convenient mold
design features, it turns the routine plastic mold design job into a working
pleasure. The optimized workflow in 3DQuickMold® enables young
engineers to accelerate their learning curve in plastic mold design. Within
a few days of training, engineers can work independently in 3DQuickMold®
environment to finish their work. In line with the benefits of SolidWorks®,
easy to use, easy to learn, and full of features are the characteristics of
3DQuickMold®.
3DQuickMold® provides
end-users
with the following functions:
Product
Assembly
Layout
Manager
Mold Base
Manager
Ejector
Manager
Cooling
Manager
Undercut
Manager
Libraries
Manager
Sub-insert
Manager
Electrode
Manager
Feed Manager
Mold
Splitting
Mold design engineers spend a
big ratio of the design time in Splitting Mold. 3DQuickMold®
combines the experience of mold makers and the powerful modeling functions
of SolidWorks® and results a very fast and direct mold split
feature in the system.
Support
multiple and/or different parts in
single cavity
Support
predefined slides & inserts before
the mold splitting
Support swap
parts and automatic update
of mold structure
Flexible
Workflow
3DQuickMold® allows
mold designers to choose multiple workflows. User may choose top-down or
bottom-up approach. Top-down approach allows user to do core and cavity
layout, selection of mold structures, before the mold split operation. It
aids the generation of bill of materials and facilitate the early purchase
planning in the whole design cycle as the result of 3D parametric design.
Bottom-up approach will guide user to complete the mold split operation
before going to the processes of core and cavity layout, and selection of
mold structure. This approach is suitable to very complex mold design.
Professional plastic mold design solution should provide automation, and at
the same time allows users to adjust and fine tune to handle new mold
design. 3DQuickMold® provides this flexibility in different
stages during the mold design cycle.
High
Performance
3DQuickMold® is
capable to handle very complicated and complex mold structures with all the
details of mold splits, ejectors, cooling channels, and electrodes without
scarifying the performance expectation of plastic mold designers.
3DQuickMold® customized the SolidWorks®
environment to achieve this optimized result. Field reports showed that
the speed of 3DQuickMold® in handling complex mold design is
equally good or even better than the most popular plastic mold design
solution in the high-end CAD markets.
|
